Latest Guides
603 guides
How Long Should Carpet Take to Dry After Cleaning?
CRI says wet-cleaned carpet should be dry within 12 hours; its residential standard notes that drying after DIY extraction can take about 6 to 12 hours.
Why Do Carpet Stains Come Back After Cleaning?
Carpet can look stained again after cleaning because residue attracts new soil or because the original contamination was not fully removed.
Can You Add Water to Air-Dry Clay to Soften It?
Yes, while the clay is still workable. Crayola says water can be added to Air-Dry Clay to soften it or to join pieces, but too much water can contribute to cracking.
Should Air-Dry Clay Be Fully Dry Before Painting?
Yes. Crayola says thoroughly dry Air-Dry Clay pieces may be painted with tempera, acrylic, or watercolor.
Is Air-Dry Clay Waterproof After Sealing?
No. Crayola explicitly says sealing Air-Dry Clay does not make it waterproof.
Can You Seal Air-Dry Clay?
Yes. Crayola says fully dry Air-Dry Clay can be sealed, and suggests testing an acrylic varnish for compatibility first.
Why Does Air-Dry Clay Warp?
Air-dry clay warps when the edges dry faster than the inside, creating uneven shrinkage across the piece.
Why Is the Water Level in My Toilet Bowl Too Low?
Low toilet-bowl water can come from a blocked or misplaced refill tube, insufficient tank water, or a vent or drain condition that prevents the bowl seal from recovering normally.
Why Does My Toilet Keep Clogging?
Repeated toilet clogs can come from an obstruction in the trapway, a restricted waste line, or inadequate venting. Frequent clogs are also listed by Kohler as a sign of a waste-stack or vent problem.
Why Is My Toilet Noisy While Refilling?
A noisy refill can come from high incoming pressure or dirt and obstructions in the fill valve. Some Kohler fill-valve procedures specifically address refill noise.
Why Is My Toilet Tank Filling Slowly?
A toilet tank can fill slowly because the supply shutoff is not fully open, the supply line is kinked or restricted, or the fill-valve inlet is blocked.
Why Does My Toilet Have a Weak Flush?
A weak toilet flush can come from low tank or bowl water level, a partially closed supply, clogged rim holes or trapway, or a restricted waste line or vent.