Kitchen & Cooking

Can You Put Coffee Grounds in a Garbage Disposal?

Coffee grounds are accepted by some garbage-disposal manufacturers, including current InSinkErator guidance, but septic-system guidance from EPA advises keeping coffee grounds out of drains.

2 min read

Kitchen & Cooking

Can You Put Grease Down a Garbage Disposal?

Grease, fats and oils should not be poured into a garbage disposal or drain; both manufacturer and EPA guidance say to keep them out of the wastewater system.

2 min read

Kitchen & Cooking

Should You Use Cold Water With a Garbage Disposal?

Use cold or cool water while a garbage disposal is grinding food waste; manufacturer guidance calls for water before, during and briefly after operation.

2 min read

Kitchen & Cooking

Why Does My Garbage Disposal Smell Bad?

A bad garbage-disposal odor is often caused by food buildup in the grind chamber or under the sink baffle, especially when too little water is used during and after grinding.

3 min read

Home & DIY

Should You Run Cold Water With a Garbage Disposal?

InSinkErator recommends cool water before and during grinding and for a few seconds after the food waste has been processed.

2 min read

Home & DIY

Can You Put Eggshells in a Garbage Disposal?

InSinkErator lists eggshells as acceptable food waste for its current Badger, Power, and Advanced disposal series when the disposal is used properly.

2 min read

Home & DIY

7 Things You Should Not Put in a Garbage Disposal

Garbage disposals are designed for food waste, but fats, oils, grease, harsh cleaning products, and non-food items should stay out, while fibrous or hard foods depend on the disposal series.

3 min read

Home & DIY

Why Is My Garbage Disposal Leaking?

A garbage disposal can leak from the sink mounting assembly, the discharge connection, the dishwasher inlet, or nearby plumbing rather than from one single location.

4 min read

Home & DIY

Why Is My Garbage Disposal Humming but Not Grinding?

A garbage disposal that hums but does not grind is commonly jammed or unable to move its grinding components freely.

4 min read